Troubleshoot FalconNet Wireless Connection (Windows)

If you are having trouble connecting to the FalconNet wireless network, perform the full wireless setup procedure as described below

Forget the Network

1. Click the wireless connection icon on the task bar and select Network settings.
2. Click Manage Wi-Fi Settings. Note: You may need to scroll down to see this option.
3. If the Manage Known Networks section appears near the bottom with the FalconNet network listed, click Forget next to the FalconNet network name. Then close the Manage Wi-Fi Settings window.

Connect to the FalconNet Wireless Network

1. Click the Wireless icon in the Title Bar
2. Select FalconNet
3. Enter your full FalconNet email address and password when prompted.  (If this does not work, try just the FalconNet username - not email)
4. Accept the certificate when prompted.

If that does not work, manually enter the information

1. Click the Wireless icon in the Title Bar
2. Select FalconNet
3. Enter your full FalconNet email address and password when prompted.  (If this does not work, try just the FalconNet username - not email)
4. Accept the certificate when prompted.

1. Right-click on the Start button and select Control Panel.
2. Click Network and Internet.
3. Click Network and Sharing Center.
4. Click Set Up a New Connection or Network.
5. Click Manually connect to a wireless network. Then click Next.
6. Perform the following:
   1. In the Network name box, type FalconNet
   2. In the Security type box, select WPA2-Enterprise.
   3. In the Encryption type box, make sure AES is selected.
   4. Make sure Start this connection automatically is selected.
   5. Click Next.
7. Click Change Connection Settings.
8.  Click the Security tab.
9. Click Advanced Settings.
10.   Select Specify Authentication Mode. Then in the box underneath, select User or computer authenticator and click OK.
11. Click Settings.
12. Perform the following:
    1. Uncheck Verify the server's identity by validating the certificate.
    2. Uncheck Enable Fast Reconnect.
    3. Click Configure.
13. Uncheck Automatically use my Windows logon name and password (and domain if any). Then click OK.
14. Click OK to exit the Protected EAP Properties window.
15. Click OK to exit the Wireless Network Properties window. 
16. Click Close. 
17. Close the Network and Sharing Center window.
18. Connect to the FalconNet network.